 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||||||||||
 |
 |
 |
|
||||||||||||||||||
 |
 |
|
|||||||||||||||||||
 |
|
||||||||||||||||||||
 |
|
||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
||||||||||||
 |
 |
 |
 |
 |
 |
 |
|
||||||||||||||
 |
|
||||||||||||||||||||
|
|||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
How to connect a Netgear DM602 ADSL Modem to a Mac or AEBS (UK)Connect DM602 to phone line via ADSL splitter. Connect Mac to DM602 by CAT5 ethernet cable. System Preferences -> Network -> in-built ethernet Enter an IP address of 192.168.0.2 Subnet Mask should be 255.255.255.0 Enter a Router address of 192.168.0.1 Start Safari Enter the web address
You will be asked for the username and password which are admin and public Wait... You will then have the NETGEAR Gateway
Click Device Mode
Enusre that the mode is set as DM602(Router).
Click Basic Router Settings
Enter the following details: Encapsulation PPP over ATM (otherwise known as PPPoA) Login enter your login name as given by ISP eg username@isp.co.uk Password enter password as given by ISP Idle Timeout enter zero (ie 0) Domain Name Server (DNS) Address Check Get Automatically From ISP ISP Parameters for Internet Access Multiplexing Method VC-BASED Virtual Circuit UK
(check with ISP for these if necessary)
Click Apply Click Test
You can now disconnect the mac and connect the DM602 to the AEBS. If you want to use an AEBS with a DM602, configure the AEBS as a Wireless Access Point.
|
 |
This document was last updated on the 16 March, 2005
|
|
