Imperial Fists Kratos Heavy Assault Tank

This Imperial Fists Kratos Heavy Assault Tank was on display at Warhammer World.

Imperial Fists Kratos Heavy Assault Tank
Imperial Fists Kratos Heavy Assault Tank at Warhammer World

The Kratos Heavy Assault Tank is based on an Ancient Terran pattern fielded during the Unification of Old Earth, redesigned after the Emperor’s treaty with the Lords of Mars to serve as the spearhead of the Great Crusade, a line-breaker and foe hammer. This grinding battle tank is all but impervious to enemy fire, and its steady, inexorable advance provides an indomitable core to any assault by the Legiones Astartes, enforced by a barrage of overwhelming firepower.

Imperial Fists Typhon Heavy Siege Tank

This Imperial Fists Typhon Heavy Siege Tank was on display in the display cabinets at Warhammer World.

Named for the ‘Great Beast’ of Ancient Terran myth, the immense Typhon Heavy Siege Tank was developed by the Mechanicum alongside the Spartan, with which it shares a basic chassis design.

This is the Forge World resin kit which was available before the release of the Horus Heresy plastic kit.

I quite like the weathering of this model.

I have the plastic kit version of the Typhon Heavy Siege Tank on my workbench, which I am painting up as an Imperial Fists Typhon.

I have also posted photographs of the Sons of Horus Typhon Heavy Siege Tank. I think the Sons of Horus model is the plastic kit.

More photographs in the Typhon Heavy Siege Tank Miniatures Gallery.

Land Raider in the desert

Here is my Grey Knights Land Raider in the desert.

Land Raider

Originally planned to be a Grey Knights Land Raider, despite the iconography, I decided I would paint it as an Imperial Fists Land Raider

Land Raider

I used the same paint scheme I had used on my Deimos Pattern  Rhino. Originally for the basecoat I used Tausept Ochre. After retreiving the model from storage, the first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I painted the weapon sub-assemblies. added detailing and painted the iconography. Then using various Citadel shades I washed and shaded the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush.  The tracks for the Land Raider were painted, and the iconography was completed with washes and highlights. The finished tracks were then glued to the Land Raider with superglue.

See the full  workbench feature on the Land Raider.

Drybrushing more of the Dreadnought

This Space Marine Dreadnought was one of the models included the Assault on Black Reach boxed set. The Warhammer 40,000 Assault on Black Reach was 5th edition’s “boxed game” or “starter set”. Having constructed the model I then put it away for a while… I got the model out of storage and decided I would paint this up as an Imperial Fists Dreadnought to accompany my new Deimos-pattern Rhino. I gave it a white undercoatusing White Scar spray. The next stage was the base coat and I did consider to either use a yellow spray, or to use the new Imperial Fist contrast paint. In the end I went with the new Imperial Fist contrast paint and I was quite pleased with the end result. I knew that though this looked quite good, it wasn’t quite the effect I wanted, so I shaded most of the model with Reikland Fleshshade Shade. I painted the weaponry and the exhausts on the Dreadnought with Leadbelcher. For the next stage I used some Citadel Layer Yriel Yellow and undertook a heavy drybrush.

I then gave the model a light drybrush of Citadel Layer Dorn Yellow.

See the workbench feature on the Space Marine Dreadnought.

Making progress on the Forge World MkIIb Land Raider

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIb Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage. I wrote up some reflections on my MkIIB Land Raider, on the current state of the painting and what I needed to do next. I had a few issues fixing the bolter guard on the top of the superstructure. I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

I am still painting up the icongraphy. The front ramp is being painted as stone.

Once that is done I will be shading the model to add depth (and weathering).

See the full Mark IIb Land Raider workbench.

Fixing the missing part

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.”The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

I wrote up some reflections recently on my MkIIB Land Raider, on the current state of the painting and what I needed to do next.

I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece. Well I was pleased to find the missing parts and these have now been reunited with the Land Raider. They were a set of twin bolters and a armoured shell for the bolters.

At the point though of repainting I didn’t glue in the armoured shell, as I knew I would need to paint the bolters first before affixing the shell.

The model was given a white undercoat and then a new basecoat of Daemonic Yellow spray from Army Painter.

I then painted the twin bolters with Leadbelcher.

When it came to fixing the shell in, I had a bit of trouble fitting it into place. It was a bit of a tight fit.

So much so trying to fit the piece I damaged the paintwork on the armoured shell.

I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

Drybrushing the Dreadnought

This Space Marine Dreadnought was one of the models included the Assault on Black Reach boxed set. The Warhammer 40,000 Assault on Black Reach was 5th edition’s “boxed game” or “starter set”. Having constructed the model I then put it away for a while… I got the model out of storage and decided I would paint this up as an Imperial Fists Dreadnought to accompany my new Deimos-pattern Rhino. I gave it a white undercoatusing White Scar spray. The next stage was the base coat and I did consider to either use a yellow spray, or to use the new Imperial Fist contrast paint. In the end I went with the new Imperial Fist contrast paint and I was quite pleased with the end result. I knew that though this looked quite good, it wasn’t quite the effect I wanted, so I shaded most of the model with Reikland Fleshshade Shade. I painted the weaponry and the exhausts on the Dreadnought with Leadbelcher.

For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. I put paint on the brush, and then used some kitchen towel to remove most of the paint, and then using a stippling process added paint to the model.

I think I still need to do something about the right leg shield.

See the workbench feature on the Space Marine Dreadnought.

Painting the weapons on the Space Marine Dreadnought

This Space Marine Dreadnought was one of the models included the Assault on Black Reach boxed set. The Warhammer 40,000 Assault on Black Reach was 5th edition’s “boxed game” or “starter set”. Having constructed the model I then put it away for a while… I got the model out of storage and decided I would paint this up as an Imperial Fists Dreadnought to accompany my new Deimos-pattern Rhino. I gave it a white undercoat using White Scar spray. The next stage was the base coat and I did consider to either use a yellow spray, or to use the new Imperial Fist contrast paint. In the end I went with the new Imperial Fist contrast paint and I was quite pleased with the end result. I knew that though this looked quite good, it wasn’t quite the effect I wanted, so I shaded most of the model with Reikland Fleshshade Shade.

I painted the weaponry and the exhausts on the Dreadnought with Leadbelcher.

See the workbench feature on the Space Marine Dreadnought.

Shading the the Space Marine Dreadnought

This Space Marine Dreadnought was one of the models included the Assault on Black Reach boxed set. The Warhammer 40,000 Assault on Black Reach was 5th edition’s “boxed game” or “starter set”. Having constructed the model I then put it away for a while… I got the model out of storage and decided I would paint this up as an Imperial Fists Dreadnought to accompany my new Deimos-pattern Rhino. I gave it a white undercoat using White Scar spray. The next stage was the base coat and I did consider to either use a yellow spray, or to use the new Imperial Fist contrast paint. In the end I went with the new Imperial Fist contrast paint and I was quite pleased with the end result.

I knew that though this looked quite good, it wasn’t quite the effect I wanted, so I shaded most of the model with Reikland Fleshshade Shade. This was the process I used on the Deimos-pattern Rhino.

I will do some further Shading with Nuln Oil and Seraphim Sepia, especially on the back of the model.

See the workbench feature on the Space Marine Dreadnought.