Land Raider in the desert

Here is my Grey Knights Land Raider in the desert.

Land Raider

Originally planned to be a Grey Knights Land Raider, despite the iconography, I decided I would paint it as an Imperial Fists Land Raider

Land Raider

I used the same paint scheme I had used on my Deimos Pattern  Rhino. Originally for the basecoat I used Tausept Ochre. After retreiving the model from storage, the first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I painted the weapon sub-assemblies. added detailing and painted the iconography. Then using various Citadel shades I washed and shaded the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush.  The tracks for the Land Raider were painted, and the iconography was completed with washes and highlights. The finished tracks were then glued to the Land Raider with superglue.

See the full  workbench feature on the Land Raider.

Razorback in the desert

One model I got many years ago, well in 2006, was a Forgeworld Razorback the one with the much bigger turret, which I much prefer over the plastic kit version that you could get in the shops back then. I recently retrieved it from storage and decided that I would try and finish painting it.

I took some photographs of the Razorback on my desert scenery tile.

There is still some work to do with this model, but I am pleased I have made progress and nearly finished it.

I like how the Inquisitorial iconography has turned out on the model.

It’s a pity that, that range has been retired. I found some more resin purity seals and a spare Rhino frontal armour plate in one of my bits box.

See the workbench feature on the Razorback.

Painting the base of the Forge World Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while. After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat. Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I gave the model a wash of Nuln Oil Shade. For the next stage I used some Citadel Leadbelcher. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did a lighter drybrush of various silver paints.

I did intend to paint the base for the model next, but upon checking the workbench feature for my Grey Knights, I realised that I needed a paint I didn’t have. For my Grey Knights I painted the flocked (well sanded) bases with Bestial Brown and then drybrushed with Bleached Bone. I bought a pot of Mournfang Brown. I used this to paint the base of the Dreadnought.

I didn’t have any Bleached Bone either. I drybrushed the base with Citadel Ushabti Bone, which is a replacement for Bleached Bone.

Forge World Grey Knights Dreadnought

Forge World Grey Knights Dreadnought

See the workbench feature on the Grey Knights Dreadnought.

Painting the base of the Forge World Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while. After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat. Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I gave the model a wash of Nuln Oil Shade. For the next stage I used some Citadel Leadbelcher. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did a lighter drybrush of various silver paints.

I did intend to paint the base for the model next, but upon checking the workbench feature for my Grey Knights, I realised that I needed a paint I didn’t have. For my Grey Knights I painted the flocked (well sanded) bases with Bestial Brown and then drybrushed with Bleached Bone. After that I went over the edge of the slottabase again with Bestial Brown.

I don’t have a pot of Bestial Brown, and Citadel no longer manufacture that colour. According to the Dakka Dakka paint compatibility chart the best option is Mournfang Brown. So, the next time I was out and about I bought a pot of Mournfang Brown. I used this to paint the base of the Dreadnought.

Forge World Grey Knights Dreadnought

Next step will be drybrushing the base.

See the workbench feature on the Grey Knights Dreadnought.

Making progress on the Forge World MkIIb Land Raider

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIb Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage. I wrote up some reflections on my MkIIB Land Raider, on the current state of the painting and what I needed to do next. I had a few issues fixing the bolter guard on the top of the superstructure. I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

I am still painting up the icongraphy. The front ramp is being painted as stone.

Once that is done I will be shading the model to add depth (and weathering).

See the full Mark IIb Land Raider workbench.

Fixing the missing part

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.”The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

I wrote up some reflections recently on my MkIIB Land Raider, on the current state of the painting and what I needed to do next.

I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece. Well I was pleased to find the missing parts and these have now been reunited with the Land Raider. They were a set of twin bolters and a armoured shell for the bolters.

At the point though of repainting I didn’t glue in the armoured shell, as I knew I would need to paint the bolters first before affixing the shell.

The model was given a white undercoat and then a new basecoat of Daemonic Yellow spray from Army Painter.

I then painted the twin bolters with Leadbelcher.

When it came to fixing the shell in, I had a bit of trouble fitting it into place. It was a bit of a tight fit.

So much so trying to fit the piece I damaged the paintwork on the armoured shell.

I eventually managed to glue in the armoured shell. I then touched up the damaged areas with a brush and some fresh paint.

Toning down the purity seals

One model I got many years ago, well in 2006, was a Forgeworld Razorback the one with the much bigger turret, which I much prefer over the plastic kit version that you could get in the shops back then. I recently retrieved it from storage and decided that I would try and finish painting it. I was using Tausept Ochre as the base coat, however having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would paint the Razorback in the same scheme. Having sprayed the underneath of the model with Citadel Zandri Dust. I gave the model a basecoat of Army Painter Daemonic Yellow. This was followed with Leadbelcher for painting the exhausts and weaponry. The next step was painting the iconography and purity seals. I then slightly messed up the shading on the model, but think I managed to get the effect I was looking for. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush. The next step was to paint and highlight the iconography. I then glued the tracks to the Razorback using superglue.

I also took the time to brighten up the purity seals and other iconography after it was dulled down by the shades and washes. I also highlighted the purity seals with some White Scar paint.

However, as with my Repressor, I think I overdid this, they are too bright for the model. I decided to dull these down a bit with some Citadel Seraphim Sepia Shade.

I think that this works better than bright white purity seals.

See the workbench feature on the Razorback.

Detailing the Forge World Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while. After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat. Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I gave the model a wash of Nuln Oil Shade. For the next stage I used some Citadel Leadbelcher. I took a large brush and gave the model, what I would call, a heavy drybrush. I then did a lighter drybrush of various silver paints.

I did intend to paint the base for the model next, but upon checking the workbench feature for my Grey Knights, I realised that I needed a paint I didn’t have. For my Grey Knights I painted the flocked (well sanded) bases with Bestial Brown and then drybrushed with Bleached Bone. After that I went over the edge of the slottabase again with Bestial Brown.

I don’t have a pot of Bestial Brown, and Citadel no longer manufacture that colour. According to the Dakka Dakka paint compatibility chart the best option is Mournfang Brown. Might have to pop out and buy a pot of that.

I did though paint the paper for the purity seals on the Dreadnought using Layer Ushabti Bone. I also used Bronze and Gold Sharpie pens for some of the metallic aspects of the model.

More drybrushing on the Forge World Grey Knights Dreadnought

I have had a Mark IV Forge World Grey Knights Dreadnought on my workbench for a while. After getting some weapon arms for the model. I gave the main model a black undercoat and started base coating with a metallic paint. The weapons I had given a white undercoat. Getting it out from storage, I decided to almost start again and gave the model a base spray of Leadbelcher. I gave the model a wash of Nuln Oil Shade. For the next stage I used some Citadel Leadbelcher. I took a large brush and gave the model, what I would call, a heavy drybrush.

I followed this up with some lighter drybrushing, first with Base Grey Knights Steel, then Layer Ironbreaker and finally Layer Stormhost Silver.

The aim was to add brightness to the Dreadnought.

See the full workbench feature on the Forge World Grey Knights Dreadnought.

Tracking the Land Raider

I have on my workbench a standard Land Raider.

The standard Land Raider, also known as the Land Raider Phobos, is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal.

For the basecoat I used Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I painted the weapon sub-assemblies. added detailing and painted the iconography. Then using various Citadel shades I washed and shaded the model. For the next stage I used some Citadel Layer Yriel Yellow. I took a large brush and gave the model, what I would call, a heavy drybrush.  The tracks for the Land Raider were painted, and the iconography was completed with washes and highlights.

The finished tracks were then glued to the Land Raider with superglue.

Really now looking the part.

See the workbench feature on the Land Raider.