Iconography on the Land Raider

I have on my workbench a standard Land Raider. For the basecoat I used Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I also painted the weapon sub-assemblies.

I started detailing and painting the iconography. Purity seals were Ushabti Bone for the paper and Mephiston Red for the red wax.

I painted the door iconography with Mechanicus Standard Grey aiming for a stone effect.

See the workbench feature on the Land Raider.

Found the missing part

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.”The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal. The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider. The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

I wrote up some reflections recently on my MkIIB Land Raider, on the current state of the painting and what I needed to do next.

I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece.

Well I was pleased to find the missing parts and these have now been reunited with the Land Raider.

Forge World MkIIB Land Raider

Still got to decide what colour I will be painting the model.

See the full Mark IIb Land Raider workbench.

Land Raider Iconography

I have on my workbench a standard Land Raider. For the basecoat I used Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I also painted the weapon sub-assemblies.

I started detailing and painting the iconography.

For the skull and the paper on the purity seals I used Ushabti Bone. For the wax seals I used Mephiston Red.

Painting tracks

Having started repainting my Land Raider, a MkIIb Land Raider, the Razorback and the Repressor, I decided to paint the tracks. Having liked what I did with the Deimos-pattern Rhino tracks, I went with the same process.

I had done a few different things with the different tracks, but most had a black undercoat.

I gave the Land Raider tracks a spray of Mechanicus Standard Grey.

I did the same for the Rhino tracks.

The tracks for the Deimos-pattern Rhino are much better than the tracks you get with the Rhino kit.

The next step will be a heavy drybrush of Gorthor Brown, then a wash of Agrax Earthshade Shade. The tracks will be finished off with a light drybrush, first with Leadbelcher, then Terminatus Stone.

Detailing the Land Raider

I have on my workbench a standard Land Raider. For the basecoat I used Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow. I also painted the weapon sub-assemblies.

I painted the lascannons with Citadel Leadbelcher.

This how they look attached the Land Raider.

I have also painted the exhausts and other weapons.

This is the Land Raider with an alternate hull frontal weapon, twin linked bolters.

Next stage will be the icongraphy.

Land Raider Lascannons

I have on my workbench a standard Land Raider. For the basecoat I used the Foundation Paints from Games Workshop, specifically Tausept Ochre. I lost interest in the model, so, it got put into storage. However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust. I gave the model a couple of light sprays of Army Painter Daemonic Yellow.

Back when I constructed the model, having made the hull I kept the weapons as separate assemblies.  The Lascannons for the Land Raider had been given a black undercoat some time ago when I undercoated the model.

I gave the weapon assemblies a partial basecoat of Citadel Zandri Dust. I then gave the weapon assemblies a couple of light sprays of Army Painter Daemonic Yellow.

This is how the weapons look attached to the Land Raider.

You can also see that I have started detailing the model, painting the flamer and exhausts with Citalde Leadbelcher.

The next stage will be painting the weapons with Leadbelcher.

 

Painting the Land Raider basecoat

As well as the Forgeworld MkIIB Land Raider I have on my workbench I also have a standard Land Raider. For the basecoat I used the Foundation Paints from Games Workshop, specifically Tausept Ochre. I lost interest in the model, so, it got put into storage.

However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme. The first thing I did was spray the underneath of the model with Citadel Zandri Dust.

Games Workshop don’t do a yellow spray and I don’t have an airbrush. I did use a paint comparison site to find a close alternative to Yriel Yellow. The Daemonic Yellow spray from Army Painter seemed like a good choice, and my local FLGS had one in stock, which I bought for the Deimos-pattern Rhino.

I gave the model a couple of light coats of Daemonic Yellow.

The rear view.

The main weapons will be painted separately.

Next stage will be painting the weapons and the exhausts, as well as the iconography.

Reflecting on the MkIIB Land Raider

The Land Raider is an Imperial main battle tank and troop transport which serves as the “armoured fist of the Space Marines.” Available to the Space Marines, the Traitor Legions of the Chaos Space Marines and the forces of the Inquisition and Adeptus Mechanicus, it is one of the most resilient and iconic armoured vehicles in the galaxy.

The Land Raider’s heritage predates even the founding of the Imperium of Man, yet it remains the single most destructive weapon in the Adeptus Astartes’ arsenal.

The Mark IIb Land Raider Phobos is one of the earliest marks of the standard pattern of Land Raider, and it still bears similarities to both the Land Raider Proteus and the Spartan Assault Tank that served as the models for the design.

The Mark IIb Land Raider Phobos is the only pattern of the standard Land Raider Phobos that uses the older armoured sponsons, as they do not allow the weapons they hold to fully rotate. This pattern of Land Raider is mostly extinct within Space Marine Armouries, having been replaced with newer marks and patterns of the standard Land Raider Phobos. However, some Chapters may still possess one or two as treasured relics of their ancient past.

I got a Forge World MkIIB Land Raider and was originally painting it up as a Grey Knights Land Raider in desert camouflage.

For the basecoat I used the old Foundation Paints from Games Workshop, specifically Tausept Ochre.

This was taking it’s time, so I decided that I would try using Citadel’s spray gun to base coat the rest of the Land Raider. However due to thinning the paint too much I didn’t get the result I hoped for. I did give it a second coat, and then lost interest in finishing the model like my other Land Raider. So, it got put into storage.

However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme.

The Land Raider does have a fair amount of Inquisitorial and Grey Knights iconography on the model, but I have decided to leave it on. I also noticed that there is a part missing the, the hull top front bolters. I will have to find where I put that piece.

The first thing I did was spray the underneath of the model with Citadel Zandri Dust.

The rear view.

Next stage is to decide what to do next.

See the full Mark IIb Land Raider workbench.

Painting the Land Raider

As well as the Forgeworld MkIIB Land Raider I have on my workbench I also have a standard Land Raider. For the basecoat I used the Foundation Paints from Games Workshop, specifically Tausept Ochre.

This was taking it’s time, so I decided that I would try using Citadel’s spray gun to base coat the rest of the Land Raider. However due to thinning the paint too much I didn’t get the result I hoped for.

I did give it a second coat, and then lost interest in finishing the model.

So, it got put into storage.

However having liked the paint scheme I was using on my Deimos-pattern Rhino, I decided that I would find the model and paint this Land Raider in the same scheme.

The Land Raider does have a fair amount of Inquisitorial and Grey Knights iconography on the model, but I have decided to leave it on.

The first thing I did was spray the underneath of the model with Citadel Zandri Dust.

The next stage will be the yellow basecoat.

Inquisitor Lorr

At the beginning of March 2005 on the blog I mentioned that GW were releasing a limited edition Witch Hunter model that would only be sold in the stores on the 2nd and 3rd April.

Inquisitor Lorr BlisterWell I didn’t think I was going to get one, but I was on my way over to Simon’s for a game of Space Hulk and stopped off at the GW store and picked one up.

It is a very nice model and is based on the Witch Hunter model that is available in the boxed set, but has a different weapon (plasma pistol) and is pointing rather than holding a sword. Personally I think it is a better model.

Rules can be found in White Dwarf #304 for this model. Now I think I might still have that, but would need to look for it… wonder if they are available online somewhere?

Here is the ‘Eavy Metal painted version of the model.

Inquisitor Lorr

After much thought (well two and a half years) I decided that I would put together the model and paint it. It was another few years before I gave the model a basecoat of Desert Yellow.

Since then I put the model of Inquisitor Lorr aside for a few years, but when looking for something else I found him, I thought I might try and finish him off.

I will first touch up his base coat, I did use Desert Yellow, which is no longer available, so I checked the conversion chart and used Tallarn Sand instead, which is a pretty good match.