15mm German SdKfz 251 Half Track

The SdKfz 251 (Sonderkraftfahrzeug 251) half-track was an armored fighting vehicle designed and first built by Germany’s Hanomag company during World War II. One of the most common, and best armoured of the wartime half-tracks, the SdKfz 251 was designed to transport the panzergrenadiers of the German mechanized infantry corps into battle. Widely known simply as “Hanomags” by both German and Allied forces.

This is an old metal model that I think was made by SDD. I have used it as a testbed for which painting method I should use with my Flames of War resin models.

See the workbench feature on the German SdKfz 251 Armoured Half Track.

Flames of War Panther G

On the 26th May, Flames of War will release the (late war) Panther G boxed set.

Panther is the common name of a medium tank fielded by Nazi Germany in World War II that served from mid-1943 to the end of the European war in 1945. It was intended as a counter to the T-34, and to replace the Panzer III and Panzer IV; while never replacing the latter, it served alongside it as well as the heavier Tiger tanks until the end of the war. The Panther’s excellent combination of firepower, mobility, and protection served as a benchmark for other nations’ late war and immediate post-war tank designs, and it is frequently regarded as one of the best tank designs of World War II.

I do like the ambush camo used on the models on the back of the boxed set.

Basecoating the Flames of War Jagdpanther

The Jagdpanther was a tank destroyer built by Nazi Germany during World War II based on the chassis of the Panther tank. It entered service late in the war and saw service on the Eastern and Western fronts. Many military historians consider the Jagdpanther to be one of the best tank destroyers of the war due to the combination of the very powerful 8.8 cm KwK 43 cannon and the characteristically excellent armor and suspension of the Panther chassis.

The kit consists of a resin hull and metal components such as tracks and track guards. After constructing the model I gave it a white undercoat. The next stage was to give the underbody a dark brown basecoat. This will add shadow to the underneath of the model, and then gave the model a basecoat of Flames of War Warpaint Late War German Armour.

See the workbench feature on the  Jagdpanther.

Undercoating the Flames of War Jagdpanther

The Jagdpanther was a tank destroyer built by Nazi Germany during World War II based on the chassis of the Panther tank. It entered service late in the war and saw service on the Eastern and Western fronts. Many military historians consider the Jagdpanther to be one of the best tank destroyers of the war due to the combination of the very powerful 8.8 cm KwK 43 cannon and the characteristically excellent armor and suspension of the Panther chassis.

The kit consists of a resin hull and metal components such as tracks and track guards. After constructing the model I gave it a white undercoat.

The next stage was to give the underbody a dark brown basecoat. This will add shadow to the underneath of the model.

See the workbench feature on the  Jagdpanther.

15mm German SdKfz 251 Half Track

The SdKfz 251 (Sonderkraftfahrzeug 251) half-track was an armored fighting vehicle designed and first built by Germany’s Hanomag company during World War II. One of the most common, and best armoured of the wartime half-tracks, the SdKfz 251 was designed to transport the panzergrenadiers of the German mechanized infantry corps into battle. Widely known simply as “Hanomags” by both German and Allied forces, they were widely produced throughout the war, with over 15,252 vehicles and variants produced in total by various manufacturers.

This is an old metal model that I think was made by SDD. I am using it as a testbed for which method I should use with my Flames of War resin models and I suspect in the end it will probably end up as a piece of scenery. However before it gets embedded into a ruin or similar, here are some photographs of it.

SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251
SDD Sd.Kfz. 251

See the workbench feature on the German SdKfz 251 Armoured Half Track.

15mm German SdKfz 251 Half Track

The SdKfz 251 (Sonderkraftfahrzeug 251) half-track was an armored fighting vehicle designed and first built by Germany’s Hanomag company during World War II. One of the most common, and best armoured of the wartime half-tracks, the SdKfz 251 was designed to transport the panzergrenadiers of the German mechanized infantry corps into battle. Widely known simply as “Hanomags” by both German and Allied forces, they were widely produced throughout the war, with over 15,252 vehicles and variants produced in total by various manufacturers.

This is an old metal model that I think was made by SDD. I am using it as a testbed for which method I should use with my Flames of War resin models and I suspect in the end it will probably end up as a piece of scenery.

Having given the model a basecoat of Warpaint German Armour the next stage was to add the disruptive camouflage. I thought long and hard about how to do this, and I didn’t have or really wanted to buy an airbrush, even though that appears to be the accepted method for doing late war German camouflage. What I did was take an old paintbrush and cut off the bristles leaving a quarter inch. This brush is then used to stipple on the camouflage pattern. I used Reflective Green (890) and Chocolate Brown (872).

I was quite pleased with the initial effect.

Though the official German manual during the war told how the camo pattern was to be applied, it said the raw paint mixture was to be mixed with petrol and sprayed onto the vehicles. Reality and short supplies of petrol meant that more often the camo pattern was “painted” onto the vehicles, sometimes with brushes and sometimes with rags.

I do like the effect that the airbrush gives these models, I am not sure if I have the requisite skill to do it justice on small models like this.

The next stage was to paint the tyres and tracks and I used German Grey (995). I then gave the models a wash using Devlan Mud wash from Games Workshop.

Quite pleased with the end result, though I think I might have used a lighter or thinner wash next time.

I painted the MG with German Grey (995) and dry brushed the model with Middlestone (882).

See the workbench feature on the German SdKfz 251 Armoured Half Track.

Flames of War Jagdpanther

The Jagdpanther was a tank destroyer built by Nazi Germany during World War II based on the chassis of the Panther tank. It entered service late in the war and saw service on the Eastern and Western fronts. Many military historians consider the Jagdpanther to be one of the best tank destroyers of the war due to the combination of the very powerful 8.8 cm KwK 43 cannon and the characteristically excellent armor and suspension of the Panther chassis.

The kit consists of a resin hull and metal components such as tracks and track guards. I took the metal tracks and glued them to the hull. They were a good fit and certainly add weight to the model.

The tracks were glued to the hull.

What I think is the radio was glued to the rear of the upper part of the hull.

The remaining metal components were then fitted to the tank.

Alongisde my Total Battle Miniatures ruins.

See the workbench feature on the  Jagdpanther.

Flames of War Jagdpanther

The Jagdpanther was a tank destroyer built by Nazi Germany during World War II based on the chassis of the Panther tank. It entered service late in the war and saw service on the Eastern and Western fronts. Many military historians consider the Jagdpanther to be one of the best tank destroyers of the war due to the combination of the very powerful 8.8 cm KwK 43 cannon and the characteristically excellent armor and suspension of the Panther chassis.

Managed to get one cheap in a Hobbycraft sale.

The kit consists of the resin building, a resin hull and metal components such as tracks and track guards.

The main part of the model is the resin hull, which is well detailed.

See the workbench feature on the  Jagdpanther.

The kit also contains a resin ruined building.

You can see how I am painting the ruined building on this page.

Flames of War German Armoured Train

Following on from my earlier post, we now have more details about the new Flames of War German Armoured Train.

There are four new models, the locomotive, an artillery wagon, an infantry wagon and a flak wagon.

I really do like this model and much prefer it over the Polish armoured train.