A&D Hardware Store

4Ground A&D Hardware Store

This is a laser-cut mdf building from 4Ground for Great Escape Games’ Dead Man’s Hand set of rules.

Andrew Dewey and Dave Annabelle met whilst they were serving as elected members of the Territorial Legislator of Montana and both living in Helena. They both had a firm interest in travelling to the Town of Dead Man’s Hand and joining the gold rush, after buying as much equipment as they could they set out on the road.

Along the way they found out about the boom town of Bitter Creek and the gold just being picked up from the ground. So after passing through Dead Man’s Hand the partners reached Bitter Creek, they quickly realised that the gold was not just waiting to be picked off the ground as they had been told, but the constant influx of new pioneers would pay handsomely for the abundance of equipment they had brought with them. Annabelle and Dewey quickly decided the best thing to do would be to set up the first hardware store in the town, ordering in all the goods they needed they quickly started earning a fair amount.

Now the A & D Hardware Store sells mining goods, tools, provisions and clothing to prospectors and pioneers. As their shipments have increased they have noticed a rise in the town of unsavoury types said by some to be under the payroll of S. L. Wheatley in nearby Dead Man’s Hand.

Like most of the newer 4Ground models, this is a well designed kit with lots of interior detail as well as on the outside. So there are inside walls as well as exterior walls.

4Ground A&D Hardware Store

Inside the building is the main retail area, time to add a counter and stock, whilst there is a rear storage area at the back of the building with a rear exit for a quick getaway if required.

4Ground A&D Hardware Store

The model goes together really easily, but as the instruction recommend you should use clamps (or pegs) when sticking the exterior walls onto the main frame to avoid unsightly gaps and a near fit.

4Ground A&D Hardware Store

4Ground A&D Hardware Store

I think the only challenge I can see is adding glazing to the windows.

Leave a Reply