It’s the Navy!

As I start to reflect on possible forces for Operation Sea Lion games I have been looking around to see what is available, there have been some useful articles in the mainstream wargaming press on this subject too.

I already have on the workbench some Bolt Action partisans, which though designed for the Eastern Front will work just as well for games of Operation Sea Lion. I also have the Dad’s Army boxed set, which means I have Home Guard and civilians.

I quite like the look of the new LDV from Warlord Games, but one unit that was recently released caught my attention. The Royal Navy section looked really interesting.

Warlord Games Bolt Action Royal Navy section

Armed primarily with the reliable Lee Enfield rifle and often supported by a Lewis machine gun, sections of highly disciplined and well-equipped naval ratings with considerable experience of close combat fighting are a fearsome opponent.

Warlord Games Bolt Action Royal Navy section

Clad in their dark blue uniforms and 1908 pattern webbing these Jack Tars will provide a dash of colour to an otherwise khaki British force.

Warlord Games Bolt Action Royal Navy section

As the war progressed, it was Royal Navy Commandos or Royal Marines who would lead shore parties rather than Navy sailors. However in the realms of Operation Sea Lion you can easily imagine German Fallschirmjäger attacking a British Navy base to secure it to defuse any opposition. The only thing they weren’t expecting was some sailors to fight back.

Another idea would be, following a German invasion and the establishment of a successful beachhead with troops moving inland, the British command send in a Royal Navy shore party secretly to rescue a key scientist who has been left behind the lines in a seaside resort. The shore party need to find the scientist, whilst avoiding Wehrmacht patrols. They may have the support of local defence volunteers, potentially even members of an Auxiliary Unit.

Of course these Naval forces will also be suitable (as will my other Sea Lion British forces) for games set in the ream of the Very British Civil War.

You can see how in the turmoil of a British internal conflict, local militia attempting to secure weapons from a naval base, find that it wasn’t going to be as easy as they thought. They did bring a hastily improvised armoured civilian truck, however then the Molotov cocktails started to rain down on them.

The rules for the Royal Navy section can be found in the Bolt Action Campaign Sea Lion expansion. When I first read this campaign book, I didn’t expect that Warlord Games would release “obscure” units such as this for the game, however I have been pleasantly surprised by the variety and number of releases for the expansion. I am probably thinking in the past of rule publications that “talk the talk” but due to a range of issues didn’t “walk the walk”. Part of this was probably down to the fact that there were companies who made miniatures and then there were companies who published rules. There were a few who did both, but not many. Warlord Games are one of those companies who do both, and do both well; you can tell their Games Workshop heritage in their business practices.

The boxed set contains ten models. A petty officer leading the squad armed with SMG. There is a two man Lewis Gun LMG team, which will provide much needed fire support against an Fallschirmjäger attack.

There are seven unique sailors all with rifles and three have Molotov cocktails. Well that Lee Enfield isn’t going to be much use against those Jerry Panzers!

So what units are you mustering to defeat the Germans as launch Operation Sea Lion?

I just need to make a call…

So you are trying to set the scene for Operational Sea Lion games for Bolt Action.

One of the challenges has been finding British scenery. If you were playing in 20mm then there was a whole model railway scene for an English landscape. However if you went down the 15mm (or the 28mm) road then alas there was very little available.

With the release of the Sea Lion campaign books from Warlord Games for Bolt Action, it’s nice to see that they are also releasing some nice scenery pieces to go with the campaign.

Fill your battlefields with iconic British objects – the Police, Telephone and Pillar boxes. An absolute must have for any British battlefield, providing key communication hubs for your local defence volunteers.

Of course I am probably not alone thinking, hmmm blue Police Box, I wonder who uses that!

So as well as Operation Sea Lion, you could also the scenery for Doctor Who games (pity the nice new Warlord Games Doctor Who miniatures are 32mm and not 28mm).

Also I can see these scenic items proving useful for a Very British Civil War games, as well as many of the Operation Sealion releases from Warlord Games. I do like their LDV volunteers for example.

I wonder if there are any other releases on the horizon?

More of the LVT-4 Buffalo Amtrac

I have started working on my Warlord LVT-4 Buffalo Amtrac for Bolt Action. The LVT-4 is a 1/56th scale 28mm resin and metal kit. Having given the model a white undercoat I then gave the model a base coat of British Armour Green.

Here are some more photographs of the model.

Warlord LVT-4 Buffalo Amtrac for Bolt Action

This is a well detailed model.

Warlord LVT-4 Buffalo Amtrac for Bolt Action

Warlord LVT-4 Buffalo Amtrac for Bolt Action

Warlord LVT-4 Buffalo Amtrac for Bolt Action

Thinking I might need to get some jeeps for my commandos.

Painting the LVT-4 Buffalo Amtrac

I have started working on my Warlord LVT-4 Buffalo Amtrac for Bolt Action. The LVT-4 is a 1/56th scale 28mm resin and metal kit.

Having cleaned the model it was a relatively simple process of putting the kit together, well apart from the issue with the rear mudguards.

Having given the model a white undercoat I then gave the model a base coat of British Armour Green.

There were lots of undercuts which meant careful spraying.

Overall I was quite pleased with the initial results, and the next stage will be adding the British markings.

Building the LVT-4 Buffalo Amtrac

There aren’t too many parts to this model, so I thought it would be a simple build, but in the end I made a mistake which meant having to start again.

The problem arose when adding the tracks to the main hull. Unlike when building Flames of War resin models which include notches for the tracks, the LVT-4 Buffalo tracks had no way of indicating where they were placed on the hull.

Doing a dry run I thought I had it right, but when I came to place the rear mudguards I realised I had them on too far back! So I had to remove the tracks, then attach the rear mudguards before replacing the tracks.

Apart from that, the rest of the model went together really easily.

The next step will be a white undercoat.